Chapter 1: Getting Started
Step 4: Step high-level source lines
Step 4: Step high-level source lines
You can step through the program by high-level source lines. The emulator
executes as many instructions as are associated with the high-level program source
lines.
1 To step a source line from the current program counter, click on the Step Source
action key, or choose Execution→Step Source→from PC.
Or, using the command line, enter:
step source
Notice that the highlighted bar (the current program counter) moves to the next
high-level source line.
2 Step into the "init_system" function by continuing to step source lines by clicking
on the Step Source action key, by clicking on the Again action key which repeats
the previous command, by choosing Execution→Step Source→fromPC, or by
entering the step source command on the command line.
16