Display Ip Routing-Table - HP MSR Series Command Reference Manual

Field
Output: 431 packets, 0 errors, 0 dropped, 0
overruns, 0 carrier, 0 collisions, 1000
txqueuelen
Input bytes
Output bytes

display ip routing-table

Use display ip routing-table to display IPv4 routing information.
Syntax
display ip routing-table
Views
Any view
Examples
# Display IPv4 routing information.
<boot> display ip routing-table
Kernel IP routing table
Destination
192.168.116.0
default
Table 25 Command output
Field
Kernel IP routing table
Destination
Gateway
Genmask
Flags
Metric
Gateway Genmask
* 255.255.255.0
192.168.116.1 0.0.0.0
Description
IPv4 routing information.
Destination address. For the default route, the value of this field is default.
Gateway address. If no gateway is needed, the value of this field is an asterisk
(*).
Subnet mask. For the default route, the value of this field is 0.0.0.0.
Flags:
•
A—The route was learned from a route advertisement.
•
C—The route is a cached route used to fast forward packets.
•
D—The route is the default route learned through neighbor discovery.
•
G—The route is a gateway route.
•
H—The route is a host route.
•
U—The route can be used.
Cost of the route.
Description
Statistics for sent packets:
•
Total number.
•
Number of erroneous packets.
•
Number of dropped packets.
•
Number of packets encountering queue overflow errors.
•
Number of packets encountering carrier failures.
•
Number of packets with collision.
•
Number of packets permitted by the queue.
Total number of received bytes.
Total number of sent bytes.
Flags Metric Ref
U 0
UG 0
188
Use Iface
0 0 m-eth0
0 0 m-eth0