Display Ip Interface Pos - HP 6600 Command Reference Manual

Field
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description
Cause

display ip interface pos

Use display ip interface pos to display IP configuration and status information for a specific POS
interface.
Syntax
display ip interface pos interface-number [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Specifies a POS interface by its number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
Description
Link status:
•
ADM—The interface has been administratively
shut down. To recover its physical state, perform
the undo shutdown command.
•
Stby—The interface is operating as a backup
interface. To see the primary interface, use the
display standby state command described in High
Availability Command Reference.
If the network layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present at all, its protocol attribute includes the
spoofing flag (an s in parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol connection state of the interface.
Main IP address of the interface.
Description of the interface.
Cause of a DOWN physical link. If the port was shut
down with the shutdown command, this field displays
Administratively. To restore the physical state of the
interface, use the undo shutdown command.
193