Icmpv6-Flood Threshold; Reset Attack-Defense Policy Flood - HP MSR Series Command Reference Manual

icmpv6-flood threshold

Use icmpv6-flood threshold to set the global threshold for triggering ICMPv6 flood attack prevention.
Use undo icmpv6-flood threshold to restore the default.
Syntax
icmpv6-flood threshold threshold-value
undo icmpv6-flood threshold
Default
The global threshold is 1000 for triggering ICMPv6 flood attack prevention.
Views
Attack defense policy view
Predefined user roles
network-admin
Parameters
threshold-value: Specifies the threshold for triggering ICMPv6 flood attack prevention. The value range is
1 to 1000000 in units of ICMPv6 packets sent to an IP address per second.
Usage guidelines
The global threshold applies to ICMPv6 flood attack detection for non-specific IPv6 addresses.
Adjust the threshold according to the application scenarios. If the number of ICMPv6 packets to a
protected server, such as an HTTP or FTP server, is normally large, set a large threshold. A small threshold
might affect the server services. For a network that is unstable or susceptible to attacks, set a small
threshold.
Examples
# Set the global threshold to 100 for triggering ICMPv6 flood attack prevention in attack defense policy
atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmpv6-flood threshold 100
Related commands
icmpv6-flood action
•
• icmpv6-flood detect ipv6
icmpv6-flood detect non-specific
•

reset attack-defense policy flood

Use reset attack-defense policy flood statistics to clear flood attack detection and prevention statistics.
Syntax
reset attack-defense policy policy-name flood protected { ip | ipv6 } statistics
Views
User view
633