Reset Bfd Session Statistics - HP 7500 Series High Availability Command Reference

Field
Destination IP
Session State
Interface
Min Trans Inter
Min Recv Inter
Act Trans Inter
Act Detect Inter
Recv Pkt Num
Send Pkt Num
Hold Time
Auth mode
Connect Type
Running up for
Chassis/Board Num
Protocol
Diag Info

reset bfd session statistics

Use reset bfd session statistics to clear the BFD session statistics.
Syntax
In standalone mode:
reset bfd session statistics [ slot slot-number ]
In IRF mode:
reset bfd session statistics [ chassis chassis-number slot slot-number ]
Views
User view
Default command level
1: Monitor level
Parameters
chassis chassis-number: Clears session statistics of a certain card on a certain member device. The
chassis-number argument refers to the member device ID, and the slot-number argument refers to the card
slot number. (In IRF mode)
slot slot-number: Clears session statistics about the card in the specified slot. The slot-number argument
refers to the card slot number. (In standalone mode)
Examples
# Clear statistics about the BFD sessions on the card in Slot 6. (In standalone mode)
Description
Destination IP address of the session.
Session state.
Name of the interface of the session.
Expected minimum transmit interval configured on the interface.
Expected minimum receive interval configured on the interface.
Actual transmit interval.
Actual session detection timer.
Number of packets received.
Number of packets sent.
Length of time before session detection timer expires.
Session authentication mode.
Connection type of the interface.
Time interval for which the session has been up.
IRF member device/card maintaining the session.
Registered protocol.
Diagnostic information about the session.
136