Configuring Ldp Session Parameters - HP MSR2000 Configuration Manual

Msr series mpls
Hide thumbs Also See for MSR2000:
Table of Contents

Advertisement

Configuring LDP session parameters

This task configures the following LDP session parameters:
Keepalive hold time and Keepalive interval.
LDP transport address—IP address for establishing TCP connections.
LDP uses Basic Discovery and Extended Discovery mechanisms to discovery LDP peers and establish LDP
sessions with them.
When you configure LDP session parameters, follow these guidelines:
The configured LDP transport address must be the IP address of an up interface on the device.
Otherwise, no LDP session can be established.
Make sure the LDP transport addresses of the local and peer LSRs can reach each other. Otherwise,
no TCP connection can be established.
Configuring LDP sessions parameters for Basic Discovery mechanism
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure the Keepalive hold
time.
4.
Configure
interval.
5.
Configure the LDP transport
address.
Configuring LDP sessions parameters for Extended Discovery mechanism
Step
1.
Enter system view.
2.
Enter LDP view.
Command
system-view
interface interface-type
interface-number
mpls ldp timer keepalive-hold
timeout
the
Keepalive
mpls ldp timer keepalive-interval
interval
mpls ldp transport-address
{ ip-address | interface }
Command
system-view
mpls ldp
26
Remarks
N/A
N/A
By default, the Keepalive hold time
is 45 seconds.
By default, the Keepalive interval is
15 seconds.
By default, the LDP transport
address is the LSR ID of the local
device if the interface where you
want to establish an LDP session
belongs to the public network. If
the interface belongs to a VPN, the
LDP transport address is the
primary IP address of the interface.
If the interface where you want to
establish an LDP session is bound
to a VPN instance, the interface
with the IP address specified with
this command must be bound to the
same VPN instance.
Remarks
N/A
N/A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents