Display Hardware-Configuration Mode; Display Hardware-Failure-Detection - HP A8800 Series Fundamentals Command Reference

Examples
# Display the operating states of all fan trays.
<Sysname> display fan
Fan 1 State: Normal
Fan 2 State: Normal
The above information shows that all fan trays work normally.

display hardware-configuration mode

Syntax
display hardware-configuration mode
View
Any view
Default level
1: Monitor level
Description
Use display hardware-configuration mode to display the hardware configuration modes for the cards on
the router except the MPUs.
By default, the hardware configuration mode is displayed as "standard."
The hardware configuration mode of a card can be displayed only when the card operates normally.
Examples
# Display the hardware configuration mode on the router.
<Sysname> display hardware-configuration mode
Current hardware configuration mode is ROUTE.
Slot ID
==========================================
7
9
Table 22 Command output
Field
Slot ID
Hardware Configuration Mode

display hardware-failure-detection

Syntax
display hardware-failure-detection [ | { begin | exclude | include } regular-expression ]
Hardware Configuration Mode
STANDARD
STANDARD
Description
ID of the slot where th card reside.
Hardware configuration mode:
•
STANDARD
•
ROUTE
144