Primary Accounting (Hwtacacs Scheme View) - HP MSR Series Command Reference Manual
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (625 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Examples
# Set the source address for outgoing HWTACACS packets to 10.1.1.1 for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] nas-ip 10.1.1.1
Related commands
hwtacacs nas-ip
primary accounting (HWTACACS scheme view)
Use primary accounting to specify the primary HWTACACS accounting server.
Use undo primary accounting to remove the configuration.
Syntax
primary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| single-connection | vpn-instance vpn-instance-name ] *
undo primary accounting
Default
No primary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address of the primary HWTACACS accounting server.
ipv6 ipv6-address: Specifies an IPv6 address of the primary HWTACACS accounting server.
port-number: Specifies the service port number of the primary HWTACACS accounting server. The value
range for the TCP port number is 1 to 65535, and the default setting is 49.
key { cipher | simple } string: Sets the shared key for secure communication with the primary
HWTACACS accounting server.
cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 373 characters.
In FIPS mode, the key is a string of 15 to 373 characters.
simple string: Sets a plaintext shared key. The string argument is case sensitive.
•
In non-FIPS mode, the key is a string of 1 to 255 characters.
In FIPS mode, the key is a string of 15 to 255 characters. The string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the primary HWTACACS accounting server use the same TCP
connection to exchange accounting packets for all users. If you do not specify this keyword, the device
establishes a new TCP connection each time it exchanges accounting packets with the primary
accounting server for a user. If the HWTACACS server supports the single-connection method, HP
recommends that you specify this keyword to reduce TCP connections for improving system performance.
85
Advertisement
Table of Contents
