Mx240 Router Hardware And Cli Terminology Mapping; Table 3: Mx240 Router Hardware Components And Cli Terminology - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

MX240 Router Hardware and CLI Terminology Mapping

Table 3: MX240 Router Hardware Components and CLI Terminology

Component Hardware Model Number
Chassis CHAS-BP-MX240
Cooling system, including fan trays, and air filters
Fan tray FFANTRAY-MX240
FFANTRAY-MX240-HC
Filter kit FLTR-KIT-MX240
Power system components
DC power supply MX240BASE-DC
AC power supply MX240BASE-AC
4
The connections between line cards and SCBs are organized in three groups:
Switch fabric—Connects the line cards and provides for packet transport between the
line cards.
Control plane—Gigabit Ethernet links between the combined SCBs/Routing Engines
and each DPC, MPC, or FPC. All board-to-board information is passed over Ethernet
except for low-level status and commands.
Management signals—Provide low-level status diagnostic support.
MX240 Component Redundancy on page 6
MX240 Chassis Description on page 7
MX240 Host Subsystem Description on page 26
MX240 Craft Interface Overview on page 37
MX240 Power System Overview on page 42
MX240 Cooling System Description on page 48
MX240 Router Physical Specifications on page 257
The MX240 router supports the components in Table 3 on page
CLI Name
MX240
MX240 Fan Tray
Enhanced Fan Tray
N/A
DC Power Entry Module
PS 1.2-1.7kW 100-240V AC
in
Copyright © 2013, Juniper Networks, Inc.
4.
Description
"MX240 Router Physical
Specifications" on page 257
"MX240 Chassis Description" on
page 7
"MX240 Cooling System
Description" on page 48
"MX240 Power System Overview"
on page 42
"MX240 DC Power Supply
Description" on page 45
"MX240 AC Power Supply
Description" on page 43