Acx5096 Router Hardware And Cli Terminology Mapping - Juniper ACX5048 Hardware Manual

Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router (continued)
Hardware
Item (as Description (as
displayed displayed in the
in the CLI) CLI)
Fan Fan
Figure 3: ACX5048 Interface Port Mapping
1
1 Electrostatic Discharge (ESD) terminal
—
2 10 Gigabit Ethernet ports (48)
—

ACX5096 Router Hardware and CLI Terminology Mapping

Table 6 on page 24 describes the hardware terms used in an ACX5096 router documentation and the
corresponding terms used in the Junos OS command line interface (CLI).
port locations of the interfaces.
Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096 Router
Hardware
Item (as Description (as
displayed displayed in the
in the CLI) CLI)
Chassis ACX5096
FPC (n) Abbreviated name
of the Flexible PIC
Concentrator (FPC)
Value (as
displayed in the Item in
CLI) Documentation
n is a value in the Fan
range of 0-4.
2
3 40 Gigabit Ethernet ports (6)
—
Value (as
displayed in the Item in
CLI) Documentation
– Router chassis
Value of n is always The router does not
0. have actual FPCs. In this
case, FPC refers to the
router itself.
Additional Information
"Cooling System and Airflow
in an ACX5000 Router" on
page 60
3
Figure 4 on page 26 shows the
Additional Information
"Chassis Physical
Specifications for an ACX5000
Router" on page 82
Interface Naming Conventions
Used in the Junos OS
Operational Commands
24