Allied Telesis x510-28GTX Command Reference Manual page 119

F C M
ILE AND ONFIGURATION ANAGEMENT
( )
COPY FILENAME
To copy the file "config.cfg" into the current directory from a USB storage device,
and rename it to "configtest.cfg", use the command:
awplus#
To copy the file "config.cfg" into the current directory from a remote file server, and
rename it to "configtest.cfg", use the command:
awplus#
To copy the file "test.txt" from the top level of Flash on stack member 2 to the
current directory in the stack master, use the command:
awplus#
Note that you must specify either the NVS or Flash filesystem on the (backup) stack
member (flash: in this example).
On an AMF managed network to distribute the file "file.txt" to the top level of Flash
memory on all nodes from the top level of Flash memory on the node named
"master", use the commands:
awplus#
network-name[80]#
Related copy zmodem
Commands
copy buffered-log
copy permanent-log
edit (filename)
show file systems
C613-50170-01 Rev B
C
OMMANDS
copy usb:/config.cfg configtest.cfg
copy fserver:/config.cfg configtest.cfg
copy awplus-2/flash:/test.txt test.txt
atmf working-set group all
copy force master.atmf/flash:/file.txt flash:
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
119