Show Users - Allied Telesis x510-28GTX Command Reference Manual

U A C
SER CCESS OMMANDS

SHOW USERS

show users
Overview This command shows information about the users who are currently logged into
the device.
show users
Syntax
Mode User Exec and Privileged Exec
Example To show the users currently connected to the device, use the command:
awplus#
Output Figure 3-5:
Line User
con 0 manager
vty 0 bob
Table 1: Parameters in the output of the show users command
C613-50170-01 Rev B
show users
Example output from the show users command
Host(s) Idle
idle 00:00:00
idle 00:00:03
Parameter Description
Line
Console port user is connected to.
User
Login name of user.
Host(s)
Status of the host the user is connected to.
Idle
How long the host has been idle.
Location
URL location of user.
Priv
The privilege level in the range 1 to 15, with 15 being the highest.
Idletime
The time interval the device waits for user input from either a
console or VTY connection.
Timeout
The time interval before a server is considered unreachable.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Location Priv Idletime Timeout
ttyS0 15
172.16.11.3 1
10 N/A
0 5
194