Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

11.6 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Network
*1 The following shows the relation between station numbers of the controller and the GOT data register.
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Set the monitor target of the set device.
Select this item when writing data to all controllers connected.
During monitoring, the controller which is set for [Host Address] of the communication detail settings
All is monitored.
(When inputting data with the numerical input function, data is written to all the connected controllers
during input. The controller set for [Host Address] is monitored during other than input (displaying).)
Select this item when monitoring the controller of the specified station No.
After selecting, set the station No. of the controller in the following range.
1 to 99:To monitor the controller of the specified station No.
Station No.
100 to 115:To specify the station No. of the controller to be monitored by the value of GOT data
register (GD).
Station No.
100
101
:
114
115
POINT POINT POINT
Device settings of CHINO controller
Devices are set with reference numbers.
For parameters corresponding to each reference number, refer to the manual of the controller to
be used.
Description
*1
GOT data register (GD)
GD10
GD11
:
GD24
GD25
11.6 Device Range that Can Be Set
Setting range
1 to 99
(If setting a value outside the range
above, a device range error occurs.)
11 - 37
11