Connecting To Mpc - Mitsubishi Electric GOT2000 Series Connection Manual

3.5.11

Connecting to MPC

■1. Communication settings
Make the communication settings by operating the key of the control equipment.
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1
*2
*3
3.5.12 Connecting to PBC201-VN2
■1. Communication settings
Make the communication settings by operating the key of the control equipment.
Communication protocol
*1
Transmission speed
Communication condition selection
(Fixed 8-bit data length)
*2*3
Station address
*1
*2
*3
3.5.13 Connecting to MVF
■1. Communication settings
Make the communication settings by operating the switch of the control equipment.
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1
*2
*3
3 - 66
3.5 Control Equipment Side Setting
Item
*1
Adjust the settings with GOT settings.
Do not set to "0".
Select the station address without overlapping with that of other units.
Item
*1
Adjust the settings with GOT settings.
Do not set to "0".
Select the station address without overlapping with that of other units.
Item
*1
Adjust the settings with GOT settings.
Do not set to "0".
Select the station address without overlapping with that of other units.
9600bps, 19200bps, 38400bps
0: 8-bit data length, Even parity, Stop bit 1
1: 8-bit data length, Non parity, Stop bit 2
0 to 127
CPL
9600bps, 19200bps, 38400bps, 115200bps
0:Even parity, Stop bit 1
1:Odd parity, Stop bit 1
2:Non parity, Stop bit 2
0 to 126
9600bps, 19200bps
8-bit data length, Even parity, Stop bit 1
8-bit data length, Non parity, Stop bit 2
0 to F
Set value
Set value
Set value