2Checking The Project Data And Os Writing On Got - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

1.2.2
Checking the project data and OS writing on GOT
Confirm if the package data is properly written onto the GOT by reading from GOT using GT Designer3.
For reading from the GOT, refer to the following manual.
1.
2.
3.
Step 1.
Set [GOT Side] as follows.
• Select [Project Data] or [Package Data] for [Read Data].
• Select the drive where the project data or the package data is stored for [Source Drive].
Step 2.
Set [PC Side].
Set the reading destination of the project for [Destination].
To read the project data to GT Designer3, select [GT Designer3].
(When [Read Data] is [Package Data], the project data cannot be read to GT Designer3.)
To read the project data as a file, click the [...] button to set the saving format and the saving destination of
the file.
Step 3.
Click the [GOT Read] button.
Step 4.
The project is read.
Step 5.
Confirm that the project data is written correctly onto the GOT.
1 - 20
1.2 Writing the Project Data onto the GOT
GT Designer3 (GOT2000) Screen Design Manual

Advertisement

Table of Contents
loading

Table of Contents