Mitsubishi Electric GOT2000 Series Connection Manual page 485

■2. Connecting to T3 or T3H
Enter the transmission parameters.
*1*2
Transmission speed
Data bit
Stop bit
Parity bit
Station No.
*1 Indicates only the transmission speeds that can be set on the GOT side.
*2 The transmission speed setting must be consistent with that of the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
➠ ■1.
■3. Connecting to model 2000 (S2, S2T, S2E), model 3000 (S3)
Enter the transmission parameters.
Transmission method
RS485
Timeout time
*2*3
Transmission speed
Data bit
Stop bit
Parity bit
Station No.
*1 Can be used as RS-422.
*2 Indicates only the transmission speeds that can be set on the GOT side.
*3 The transmission speed setting must be consistent with that of the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
➠ ■1.
Item
4800bps, 9600bps, 19200bps
7bit
2bit
Even
1
Setting communication interface (Communication settings)
Item
RS485
COM1
5sec
4800bps, 9600bps, 19200bps
7bit
2bit
Even
1
Setting communication interface (Communication settings)
Set value
Set value
*1
12.2 Serial Connection
12
12 - 11