Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

4.2.10

GOT Side Settings

■1. Setting communication interface (Communication settings)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: OMRON
• Controller Type: Set the option according to the Controller Type to be connected.
OMRON SYSMAC
OMRON SYSMAC CS/CJ
• I/F: Interface to be used
• Driver: OMRON SYSMAC
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
4 - 30
4.2 Serial Connection
2.
[Controller Setting] from the menu.
4.2.10 ■2. Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.3 I/F communication setting
3.
4.
Click!

Advertisement

Table of Contents
loading

Table of Contents