Mitsubishi Electric GOT2000 Series Connection Manual page 326

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

■4. Ethernet setting
Item
Host
N/W No.
*1
Station
Unit Type
IP Address
Port No.
Communication
*1
6 - 30
6.3 Ethernet Connection
The host is displayed. (The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
KEYENCE (fixed)
Set the IP address of the connected Ethernet module.
(Default: 192.168.0.10)
Set the port No. of the connected Ethernet module.
(Default: 8501)
UDP, TCP
(Default: UDP)
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠ ■2.
Communication detail settings
POINT
POINT
POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Description
Set value
-
1 to 239
1 to 254
KEYENCE (fixed)
PLC side IP address
PLC side port No.
Adjust the settings with the PLC
settings.

Advertisement

Table of Contents
loading

Table of Contents