Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

5.4

GOT Side Settings

5.4.1 Setting communication interface (Communication settings)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: OMRON
• Controller Type: Set according to the temperature controller model to be connected.
Series
THERMAC NEO
INPANEL NEO
E5□C
THERMAC R
• I/F: Interface to be used
• Driver: Set according to the controller type to be connected.
<Controller Type:OMRON THERMAC/INPANEL NEO>
OMRON THERMAC/INPANEL NEO
<Controller Type:OMRON digital temperature controller>
OMRON digital temperature controller
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
5.4.2 Communication detail settings
Click the [OK] button when settings are completed.
2.
[Controller Setting] from the menu.
Model of temperature controller
E5AN, E5EN, E5CN, E5GN
E5AN-H, E5CN-H, E5EN-H, E5AN-HT,
E5CN-HT, E5EN-HT
E5ZN
E5CC(-T,-B), E5DC, E5GC, E5EC(-T,-B),
E5AC(-T)
E5AR(-T), E5ER(-T)
POINT POINT POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.3 I/F communication setting
3.
4.
Click!
Controller Type
OMRON THERMAC/INPANEL NEO or
OMRON digital temperature controller
OMRON digital temperature controller
OMRON THERMAC/INPANEL NEO or
OMRON digital temperature controller
OMRON digital temperature controller
OMRON digital temperature controller
5.4 GOT Side Settings
5
5 - 23