Azbil Sdc/Dmc Series - Mitsubishi Electric GOT2000 Series Connection Manual

*2 From the value of GD10 to 25, the upper 8bits are set for station No., and the lower 8bits for the Sub Station.
In this case, the setting of [Sub Station] is invalid.
The following shows the relation between station numbers of the control equipment and the GOT data register.
Example:When [Station No.] is set to 100
3.6.1

AZBIL SDC/DMC Series

Device name
Bit device The bit specification of the word device
*1
Word device
Data (..)
*1 Only 16-bit (1-word) designation is allowed.
3.6.2 AZBIL DMC50/AHC2001
Device name
Network Addresses (NA)
Double word
device
Parameter Addresses (PA)
*1 Only 32-bit (2-word) designation is allowed.
■1. Network Addresses (NA)
The following shows the network address settings and definitions.
Network Addresses
0000
Station No.
100
101
:
114
115
When [Station No.] is set to 100, the monitoring target is set based on the GD10 value.
GD10 = 0x010A
(Upper 8bits) 0x01 Station No.: 1
(Lower 8bits) 0x0A Sub Station: 10
POINT POINT POINT
Station No. and Sub Station of AZBIL DMC50
The station No. and Sub Station set when using AZBIL DMC50 correspond to NW No. and
Station number of MITSUBISHI ELECTRIC PLC, respectively.
*1
*1
GOT data register (GD)
GD10
GD11
:
GD24
GD25
Setting range
Setting range of each word device
..273 to ..31243
Setting range
0000 to FFFF
00000 to FFFFF
Network Addresses
3.6 Device Range that Can Be Set
Setting range
0x0000 to 0xFFFF
Device No. representation
―
Decimal
Device No. representation
Hexadecimal
Hexadecimal
Definition
3
3 - 73