Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

7.4

GOT Side Settings

7.4.1
Setting communication interface (Communication settings)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: KOYO
• Controller Type: KOYO KOSTAC/DL
• I/F: Interface to be used
• Driver: KOYO KOSTAC/DL
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
7.4.2 Communication detail settings
Click the [OK] button when settings are completed.
2.
[Controller Setting] from the menu.
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.3 I/F communication setting
3.
4.
Click!
7.4 GOT Side Settings
7
7 - 23

Advertisement

Table of Contents
loading

Table of Contents