1.2
Writing the Project Data onto the GOT
Write the package data onto the GOT.
For details on writing to GOT, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
1.2.1
Writing the project data and OS onto the GOT
1.
2.
3.
4.
Step 1.
Select [Package Data] for [Write Data].
The capacity of the transfer data is displayed in [Data Size]. Check that the destination drive has the
sufficient available space.
Step 2.
Select [Destination Drive].
Step 3.
When the system application or the special data is required to be added to the package data or deleted,
click the [Write Option] button and configure the setting in the [Write Option] dialog.
Step 4.
Click the [GOT Write] button.
Step 5.
The package data is written to the GOT.
1.2 Writing the Project Data onto the GOT
1
1 - 19