POINT
POINT
POINT
(1) Device settings of TOSHIBA PLC
(a) When setting a relay as a bit device
Set the device using the format of word address (DEC) + bit address (HEX).
Device name
(b) When setting a relay as a word device
Set the device using the format of word address (DEC).
For the device name setting, enter "w" before the bit device name.
Device name
(adding "W")
(2) Notation of device address (when using PROSEC V series)
The notation of device address setting is different between the TOSHIBA PLC peripheral
software and GOT.
For the difference of notations between peripheral softwares and GOT, refer to the following.
➠ ■2.
TOSHIBA PLC (TOSHIBA PROSEC T/V Series)
Device number
Bit address (HEX)
Word address (DEC)
Device number
12.4 Device Range that Can Be Set
12
12 - 19