Connecting To Aur350C, Aur450C - Mitsubishi Electric GOT2000 Series Connection Manual

3.5.14

Connecting to AUR350C, AUR450C

■1. Communication settings
Make the communication settings by operating the Smart Loader Package (SLP-A35, SLP-A45) of the control
equipment.
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1
*2
*3
■2. Station address setting
Set the station address switch.
(1) For AUR350C
(2) For AUR450C
3 - 68
3.5 Control Equipment Side Setting
Item
*1
Adjust the settings with GOT settings.
Do not set to "0".
Select the station address without overlapping with that of other units.
9600bps, 19200bps
8-bit data length, Even parity, Stop bit 1
8-bit data length, Non parity, Stop bit 2
0 to F
Station No. setting switch
Station No. setting switch
Set value