Mitsubishi Electric GOT2000 Series Connection Manual page 434

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

10.7 Precautions
■1. Station number settings of indicating controller
In the system configuration, the indicating controller with the station number set with the host address must be
included.
For details of host address setting, refer to the following.
■2. GOT clock control
Since the indicating controller does not have a clock function, the settings of [time adjusting] or [time broad cast] by
GOT clock control will be disabled.
■3. When using the communication converter IF-400
When using the communication converter IF-400, some communication error may occur.Set the number of retries to
more than one time.
■4. Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device.For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
10 - 22
10.7 Precautions
10.4.1 Setting communication interface (Communication settings)
GT Designer3 (GOT2000) Screen Design Manual

Advertisement

Table of Contents
loading

Table of Contents