Connecting To Rx - Mitsubishi Electric GOT2000 Series Connection Manual

3.5.15

Connecting to RX

■1. Communication settings
Make the communication settings by operating the Smart Loader Package (SLP-RX) of the control equipment.
Item
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
3.5.16 Connecting to CMC10B
■1. Communication settings
Make the communication settings by operating the Smart Loader Package (SLP-CM1) of the control equipment.
Item
*1
Transmission speed
*1
Communication format
*2*3
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
■2. Station address setting
Set the station address switch.
9600bps, 19200bps ,38400bps
Even parity stop 1
(8-bit data length, Even parity, Stop bit 1)
Even parity stop 2
(8-bit data length, Even parity, Stop bit 2)
*1
Odd parity stop 1
(8-bit data length, Odd parity, Stop bit 1)
Odd parity stop 2
(8-bit data length, Odd parity, Stop bit 2)
1 to 32
9600bps, 19200bps
0:8-bit data length, Even parity, Stop bit 1
1:8-bit data length, Non parity, Stop bit 2
0 to 99
Station No. setting switch
Set value
Set value
3.5 Control Equipment Side Setting
3
3 - 69