Plc Side Setting - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.3

PLC side setting

■1. KV-LE21V/LE20V/EP21V setting
Set the IP address and port No. by the unit editor of KV STUDIO.
Item
Communication mode
*1
IP address
*1
Port No.
(Host link)
*1 Adjust the settings with the Ethernet settings of the GOT side.
➠ ■4.
POINT POINT POINT
Ethernet setting for GT21 and GS
(1) Effective range of the Ethernet setting
Only [1] to [4] of the Ethernet setting can be used for the GT21 and the GS. Even though [5]
or later of the Ethernet setting is written to the GT21 and the GS, the setting is disabled on
the GT21 and the GS side.
(2) Range of the host station setting
Set a host station within the range of [1] to [4] of
the Ethernet setting.
Only [1] to [4]
can be used.
POINT POINT POINT
KEYENCE PLC
For details of KEYENCE PLC, refer to the following manual.
➠ KEYENCE PLC user's Manual
Ethernet
Set the IP address.
Set the port No.
Ethernet setting
Description
6.3 Ethernet Connection
Range
-
0.0.0.0 to 255.255.255.255
256 to 65534
6 - 31
6