Mitsubishi Electric GOT2000 Series Connection Manual page 448

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

■2. Precautions when preparing a cable
(1) Cable length
The length of the RS-422 cable must be 1200m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
(3) CHINO controller side connector
Use the connector compatible with the CHINO controller side module.
For details, refer to the user's manual of the CHINO controller.
■3. Connecting terminating resistors
(1) GOT side
(a)
For GT27, GT25(Except GT2505-V), GT23
Set the terminating resistor setting switch of the GOT main unit to "Enable".
(b)
For GT2505-V
Set the terminating resistor selector to "330Ω".
For the procedure to set the terminating resistor, refer to the following.
(2) CHINO controller side
When connecting a CHINO controller to the GOT, a terminating resistor must be connected to the CHINO controller.
11 - 14
11.3 Connection Diagram
1.4.1 GOT connector specifications
1.4.3 Terminating resistors of GOT
User's Manual of the CHINO controller

Advertisement

Table of Contents
loading

Table of Contents