■2. Precautions when preparing a cable
(1) Cable length
The length of the RS-485 cable must be 1200m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
➠
(3) Connector for Panasonic Industrial Devices SUNX PLC
Use the connector applicable to the Panasonic Industrial Devices SUNX PLC.
For details, refer to the Panasonic Industrial Devices SUNX PLC user's manual.
■3. Connecting terminating resistors
(1) GOT side
(a)
For GT27, GT25(Except GT2505-V), GT23
Set the terminating resistor setting switch of the GOT main unit to "Disable".
(b)
For GT2505-V, GT21
Set the terminating resistor selector to "110Ω".
For details of terminating resistor settings, refer to the following.
➠
15 - 36
15.3 Connection Diagram
1.4.1 GOT connector specifications
1.4.3 Terminating resistors of GOT