Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

9.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
POINT POINT POINT
(1) Device settings of SHARP PLC
(a) When setting a register as a bit device
• Registers
Set the type (first 2 digits) and the address.
Number
• File register
Set the file number and the address.
File number
(b) When setting a register and memory as a word device.
• I/O relay
Set a combination of the device address (multiple of 16)+bit address format (fixed to 0).
Even number
• Registers and file register
Set the device address (multiple of 16).
Type
Description
Address
Address
The next line must be set
to 0,for it is bit address.
Even number
9.6 Device Range that Can Be Set
9
9 - 19