Connecting To Sdc40A/40B/40G - Mitsubishi Electric GOT2000 Series Connection Manual

■2. Station address setting
Set the station address using the rotary switch for the station address.
3.5.2

Connecting to SDC40A/40B/40G

■1. Communication settings
Make the communication settings by operating the key of the temperature controller.
Item
*1
Transmission speed
Data Bit
*1
Parity bit
Stop bit
*2*3
Station address
*1 The transmission speed setting must be consistent with that of the GOT side.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
3.5.3 Connecting to SDC15, SDC25/26 or SDC35/36
■1. Communication settings
Make the communication settings by operating the key or Smart Loader Package (SLP-C35) of the temperature
controller.
Item
*1
Transmission speed
*2
Communication mode
*1
Data bit
*1
Parity bit
*1
Stop bit
Communication minimum response time
*3*4
Station address
*1 The transmission speed setting must be consistent with that of the GOT side.
*2 Set to CPL.
*3 Do not set to "0".
*4 Select the station address without overlapping with that of other units.
Rotary switch
for the station address
9600bps
8bits
Even, none
1bit, 2bits
0 to 127
9600bps, 19200bps
CPL
7bits, 8bits
Odd, even, none
1bit, 2bits
1 to 250ms
0 to 127
Front of the temperature
controller body
Set value
Set value
3.5 Control Equipment Side Setting
3
3 - 61