Mitsubishi Electric GOT2000 Series Connection Manual page 11

[PRECAUTIONS WHEN THE DATA STORAGE IS IN USE]
If the SD card is removed from drive A of the GOT while being accessed by the GOT, the GOT may
stop processing data for about 20 seconds.
The GOT cannot be operated during this period.
The functions that run in the background including a screen updating, alarm, logging, scripts, and
others are also interrupted.
Before removing the SD card, check the following items.
• GT27, GT25, GT23 (Except for GT2505)
Check that the SD card access LED is off before removing the SD card.
• GT2505
Make sure to turn off the SD card access switch before removing the SD card.
Not doing so may damage the SD card and files.
• GT21
Disable the SD card access in the GOT utility, and then check that the SD card access LED is off
before removing the SD card.
[PRECAUTIONS WHEN THE DATA STORAGE IS IN USE]
If the data storage is removed from the GOT while being accessed by the GOT, the data storage and
files may be damaged.
Before removing the data storage from the GOT, check the SD card access LED, system signal, or
others to make sure that the data storage is not accessed.
Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
When using the GOT with an SD card inserted, check the following items.
• GT27, GT25, GT23 (Except for GT2505)
When inserting a SD card into the GOT, make sure to close the SD card cover.
Not doing so causes the data not to be read or written.
• GT2505-V
Before inserting an SD card into the GOT, turn on the SD Card Access Switch.
Not doing so causes the data not to be read or written.
• GT21
When inserting an SD card into the SD card unit, make sure to enable the SD card access in the
GOT utility in advance.
Not doing so causes the data not to be read or written.
WARNING
CAUTION
A - 9