Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.3.3

GOT side settings

■1. Setting communication interface (Communication settings)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: OMRON
• Controller Type: Varies with the PLC.
SYSMAC CJ1/CJ2/CS1 series: OMRON SYSMAC
NJ series: OMRON NJ
• I/F: Standard I/F (Ethernet): multi-channel connection
• Driver: Varies with the model.
OMRON SYSMAC: Ethernet(OMRON), Gateway
OMRON NJ: EtherNet/IP(OMRON NJ), Gateway
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
4.3.3 ■2. Communication detail settings
Click the [OK] button when settings are completed.
2.
[Controller Setting] from the menu.
POINT POINT POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.3 I/F communication setting
3.
4.
Click!
4.3 Ethernet Connection
4
4 - 51