Mitsubishi Electric GOT2000 Series Connection Manual page 45

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

■2. Setting item
The following describes the setting items for the standard I/F setting and extension I/F setting.
For the detailed explanations, refer to the following manual.
GT Designer3 (GOT2000) Screen Design Manual
When the GT21 series is
selected in the GOT type setting
Item
Set channel No. and drivers to the GOT standard interfaces.
CH No.
Standard I/F setting
Driver
Detail Setting
I/F-1,I/F-2,I/F-3
RS232 Setting
Set the channel number and the communication driver to the Ethernet interface with a built-in GOT.
CH No.
Ethernet connection
setting
Driver
Detail Setting
Set the CH No. according to the intended purpose.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
5 to 8: Used for barcode function, RFID function, remote personal computer operation function (serial)
A: Used for the report function (with a serial printer), hard copy function (with a serial printer).
Set the driver for the device to be connected.
• Each communication driver suitable to the channel numbers
• Each communication driver for connected devices
Set the detailed settings for the communication driver.
Refer to each chapter of the equipment to be connected to the GOT.
The communication type of the GOT standard interface is displayed.
To validate the 5V power supply function in RS232, mark the [Enable the 5V power supply] checkbox.
The RS232 setting is invalid when the CH No. of [I/F-1: RS232] is [9].
GT21 is not supported.
Set the CH No. according to the intended purpose.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
9: Used for connecting Host (PC) or Ethernet download
A: Used for the remote personal computer operation function (Ethernet), VNC server function, gateway
function, and MES interface function.
Multi: Used for multi-channel Ethernet connection
Set the driver for the device to be connected.
• Each communication driver suitable to the channel numbers
• Each communication driver for connected devices
Set the detailed settings for the communication driver.
Refer to each chapter of the equipment to be connected to the GOT.
1.1 Setting the Communication Interface
Description
1
1 - 17

Advertisement

Table of Contents
loading

Table of Contents