Cisco ASR 9000 Series Command Reference Manual page 1090

timeslots
The following example shows configuration of the full 24 timeslots on the 2-Port Channelized OC-12/DS0
SPA, which is required when configuring link noise monitoring:
RP/0/RSP0/CPU0:router(config)# controller t1 0/6/0/0/10
RP/0/RSP0/CPU0:router(config-t1e1)# channel-group 5
RP/0/RSP0/CPU0:router(config-t1e1-channel_group)# timeslots 1-24
Related Commands
Command
framing (E1), on page 1002
framing (T1), on page 1006
speed (DS0), on page 1067
channel-group, on page 957
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1070
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
Description
Selects the frame type for an E1 data line.
Selects the frame type for a T1 data line.
Specifies the speed of the underlying DS0s in a channel group.
Configures a DS0 channel group and enters channel group
configuration mode.