10-Gigabit Ethernet Wan Phy Controller Commandson The Cisco Asr 9000 Series Router - Cisco ASR 9000 Series Command Reference Manual

10-Gigabit Ethernet WAN PHY Controller
Commandson the Cisco ASR 9000 Series Router
This module describes the commands to configure a 10-Gigabit Ethernet WAN PHY physical controller on
the Cisco ASR 9000 Series Router.
For information on 10-Gigabit Ethernet (GE) interface commands see the Ethernet Interface Commandson
the Cisco ASR 9000 Series Router module.
• clear controller wanphy, page 1096
• clear counters wanphy, page 1098
• controller wanphy, page 1100
• report sd-ber, page 1102
• report sf-ber disable, page 1103
• show controllers wanphy, page 1105
• threshold sd-ber, page 1114
• threshold sf-ber, page 1116
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1095