Cisco ASR 9000 Series Command Reference Manual page 1064

show controllers lnm
Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Syslog
--------------------------------------------------------------------
enabled
The following example shows sample output from the show controllers t1 lnm command with the event
keyword for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/1/1/0/1/1 lnm event
Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Last Five Events
--------------------------------------------------------------------
MINWARNCROSS: Noise crossed minor-warn threshold at Thu May 13 09:54:10 2010
MAJWARNCROSS: Noise crossed major-warn threshold at Thu May 13 09:54:11 2010
MAJWARNCLEAR: Noise cleared major-warn threshold at Thu May 13 10:27:25 2010
MINWARNCLEAR: Noise cleared minor-warn threshold at Thu May 13 10:28:14 2010
The following example shows sample output from the show controllers t1 lnm command with the statistics
keyword for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/1/1/0/1/1 lnm statistics
Thu May 13 10:28:26.474 PDT
Controller T1 0/1/1/0/1/1
Monitoring type
---------------
Create
Update
Delete
Clear
Noise Crossed
Noise Cleared
Related Commands
Command
clear controller lnm, on page 959
lnm major-warning, on page 1012
lnm minor-warning, on page 1015
show logging
show logging events buffer
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1044
Monitoring type State
minor-warning stable
major-warning stable
Minor-Warn
------------
1
0
0
0
1
1
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
Thresholds (lcv/pcv/duration)
Set( 15/ 15/ 4) Clear(
Set( 154/ 145/ 4) Clear( 154/ 145/
Major-Warn
------------
1
0
0
0
1
1
Description
Clears link noise monitoring states or statistics.
Enables link noise monitoring and specifies thresholds
for noise errors on T1/E1 links that are used to signal
major warning events and recovery from those events.
Enables link noise monitoring and specifies thresholds
for noise errors on T1/E1 links that are used to signal
minor warning events and recovery from those events.
Displays the contents of the logging buffer.
Displays messages in the logging events buffer.
15/ 15/ 4)
4)