10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
Task ID
Task ID
interface
Examples
This example shows how to enter WAN PHY controller configuration mode:
RP/0/RSP0/CPU0:router # configure
RP/0/RSP0/CPU0:router(config)# controller wanphy 0/6/0/0
RP/0/RSP0/CPU0:router(config-wanphy)#
Related Commands
Command
show controllers wanphy, on page 1105
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Displays alarms, registers, and module information for a
10-Gigabit Ethernet WAN PHY controller.
controller wanphy
Release 5.3.x
1101