Mitsubishi Electric Q26UD(E)HCPU User Manual page 520

Number Name Meaning
Transmission Transmission
SD100 speed speed set in
storage area parameter
Communicati Communicati
SD101 on setting on setting set
storage area in parameter
Transmission Transmission
SD102 wait time wait time set
storage area in parameter
CH1
Transmission
transmission
SD105 speed (RS-
speed setting
232)
(RS-232)
Data sending
Data sending
SD110 result storage
result
area
Data
Data
receiving
SD111 receiving
result storage
result
area
Amount of Amount of
SD118 battery battery
consumption consumption
518
Explanation
This register stores the transmission speed set in parameter
when the serial communication function is used.
12: 1200bps, 24: 2400bps, 48: 4800bps, 96: 9600bps, 192:
19200bps, 384: 38400bps, 576: 57600bps, 1152: 115200bps
This register stores the communication setting set in
parameter when the serial communication function is used.
b15 b6
to
Since this area is reserved for
a system, storage data are variable.
Write during RUN setting
0: Disabled
1: Enabled
This register stores the transmission wait time set in
parameter when the serial communication function is used.
0: No waiting time
10 to 150: Waiting time (unit: ms)
Default: 0
This register stores a transmission speed. (If no external
device is connected, the default value, 1152, is stored.)
96: 9600bps, 192: 19200bps, 384: 38400bps, 576: 57600bps,
1152: 115200bps
This register stores a transmission speed. (If no external
device is connected, the default value, 1152, is stored.)
This register stores a transmission speed set in parameter
when the serial communication function is used
96: 9600bps, 192: 19200bps, 384: 38400bps, 576: 57600bps,
1152: 115200bps
This register stores a transmission speed. (When the
L02SCPU, L02SCPU-P, or RS-232 adapter is used, the
default value, 1152, is stored.)
This register stores a transmission speed set in parameter
when the serial communication function is used.
96: 9600bps, 192: 19200bps, 384: 38400bps, 576: 57600bps,
1152: 115200bps
This register stores the error code if an error occurs during
data transmission when the serial communication function is
used.
This register stores the error code if an error occurs during
data reception when the serial communication function is
used.
This register stores a battery consumption rate.
[Value range]
• 1 or 2: Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU,
Q03UD(E)CPU, Q04UD(E)HCPU, L02SCPU, L02SCPU-P,
L02CPU, L02CPU-P
• 1 to 3: Q06UD(E)HCPU, L06CPU, L06CPU-P, L26CPU,
L26CPU-P, L26CPU-BT, L26CPU-PBT
• 1 to 4: Q10UD(E)HCPU, Q20UD(E)HCPU,
Q13UD(E)HCPU, Q26UD(E)HCPU
• 1 to 5: Q50UDEHCPU, Q100UDEHCPU
Set by
(When Set)
S (Power-
ON or
reset)
b5 b4 b3 b0
to
S (Power-
ON or
reset)
Since this area is
reserved for a system,
storage data are variable.
Sumcheck presence
0: Absent
1: Present
S (Power-
ON or
reset)
*8
.
S (Error)
S (Error)
S (Status
change)
Corresponding
Corresponding
ACPU
D9
Q00/Q01
New QnU
LCPU
Q00/Q01
New QnU
LCPU
Q00/Q01
New QnU
LCPU
Qn(H)
S New QnPH
QnPRH
S New
QnU
S New LCPU
Q00/Q01
New QnU
LCPU
Q00/Q01
New QnU
LCPU
QnU (except
New QnUDV)
LCPU
CPU
*4
*7
*4
*7
*4
*7
*3
*4
*7
*4
*7