Mitsubishi Electric Q26UD(E)HCPU User Manual page 137

No. Name
14) Module fixing projection
15) Module mounting lever
*1 When leaving a cable connected to a USB connector or RS-232 connector, clamp the cable to prevent a poor
connection, moving, and disconnection by unintentional pulling.
The Q6HLD-R2 type RS-232 connector disconnection prevention holder is available as a clamp for the RS-232
connector.
*2 Operate the RUN/STOP/RESET switch with your fingertips.
To prevent the switch from being damaged, do not use any tool such as screw driver.
Projection used to secure the module to the base unit.
Lever used to mount the module to the base unit.
CPU module
RS-232 cable
Fixing screw
CHAPTER 6 CPU MODULE
Application
Q6HLD-R2
6
135