Mitsubishi Electric Q26UD(E)HCPU User Manual page 149

Item
*7
Step relay [S]
Index register [Z]
Pointer [P]
Interrupt pointer [I]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Latch range
RUN/PAUSE contact
Clock function
Allowable momentary power failure
time
5VDC internal current consumption
H
External dimensions
W
D
Weight
*5 Each of parameter, intelligent function module parameter, sequence program, SFC program, device comment, and initial
device value files can be stored.
*6 The number of points can be changed within the setting range.
( Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
*7 The step relay is a device for the SFC function.
*8 The value is for the CPU module and base unit together.
*9 The value includes the CPU module, base unit, and power supply module.
Remark
For the general specifications, refer to Page 117, CHAPTER 5.
Q00JCPU
2048 points (S0 to 127/block) (The number of device points is fixed.)
10 points (Z0 to 9) (The number of device points is fixed.)
300 points (P0 to 299) (The number of device points is fixed.)
128 points (I0 to 127) (The number of device points is fixed.)
The cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
(2 to 1000ms, 1ms unit)
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
1024 points (SM0 to 1023) (The number of device points is fixed.)
1024 points (SD0 to 1023) (The number of device points is fixed.)
16 points (FX0 to F) (The number of device points is fixed.)
16 points (FY0 to F) (The number of device points is fixed.)
5 points (FD0 to 4) (The number of device points is fixed.)
Device for accessing the link device of a network module directly
Specified form: J\X, J\Y, J\W, J\B,
J\SW, J\SB
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U\G
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters.)
One contact can be set up in X0 to 7FF for each of RUN and PAUSE. (Setting by parameters.)
Year, month, date, hour, minute, second and day of the week
(Automatic leap year detection)
Accuracy: -3.2 to +5.27s(TYP.+1.98s)/d at 0°C
Accuracy: -2.57 to +5.27s(TYP.+2.22s)/d at 25°C
Accuracy: -11.68 to +3.65s(TYP.-2.64s)/d at 55°C
20ms or less (100VAC or
more)
*8
0.26A
98mm
*9
244.4mm
*9
0.66kg
Basic model QCPU
Q00CPU
----
L0 to 2047 (default)
Varies depending on the power supply module.
0.25A
98mm
27.4mm
89.3mm
0.13kg
CHAPTER 6 CPU MODULE
Q01CPU
0.27A
147
6