Mitsubishi Electric Q26UD(E)HCPU User Manual page 168

Item
Program memory
Memory card (RAM)
Memory
Max. number
card
of files stored
(ROM)
Standard RAM
Standard ROM
Max. number of intelligent
function module
parameters
No. of times of writing data into the
program memory
No. of times of writing data into the
standard ROM
No. of I/O device points
(No. of points usable on program.)
No. of I/O points
(No. of points accessible to the actual
I/O module.)
*7
Internal relay [M]
*7
Latch relay [L]
*7
Link relay [B]
*7
Timer [T]
*7
Retentive timer [ST]
*7
Counter [C]
*7
Data register [D]
Extended data register [D]
*7
Link register [W]
Extended link register [W]
*7
Annunciator [F]
*7
Edge relay [V]
*7
Link special relay [SB]
Link special register [SW]
166
Q03UDCPU
Q03UDECPU
Flash card
ATA card
4 files (each one of the following files: file register file, local device file,
Initial
setting
Refresh
The low- and high-speed timers are specified by the instructions.
The measurement unit of the low- and high-speed timers is set up by parameters.
(High-speed timer: 0.01 to 100ms, 0.01ms unit, 10.00ms by default)
0 points by default (sharing of the low- and high-speed retentive timers) (changeable)
The low- and high-speed retentive timers are specified by the instructions.
The measurement unit of the low- and high-speed retentive timers is set up by parameters.
(Low-speed retentive timer: 1 to 1000ms, 1ms unit, 100ms by default)
(High-speed retentive timer: 0.01 to 100ms, 0.01ms unit, 10.00ms by default)
Normal counter, 1024 points by default (C0 to 1023) (changeable)
*7
Universal model QCPU
Q04UDHCPU Q06UDHCPU
Q04UDEHCPU Q06UDEHCPU
*4
124
319 (When the Q3MEM-8MBS is used)
288
511
sampling trace file, and module error collection file)
256
4096
2048
Max. 100000 times
Max. 100000 times
8192 points (X/Y0 to 1FFF)
4096 points (X/Y0 to FFF)
8192 points by default (M0 to 8191) (changeable)
8192 points by default (L0 to 8191) (changeable)
8192 points by default (B0 to 1FFF) (changeable)
2048 points by default (T0 to 2047) (changeable)
(Sharing of low- and high-speed timers)
(Low-speed timer: 1 to 1000ms, 1ms unit, 100ms by default)
12288 points by default (D0 to 12287) (changeable)
0 points by default (changeable)
8192 points by default (W0 to 1FFF) (changeable)
0 points by default (changeable)
2048 points by default (F0 to 2047) (changeable)
2048 points by default (V0 to 2047) (changeable)
2048 points by default (SB0 to 7FF) (changeable)
2048 points by default (SW0 to 7FF) (changeable)
Q10UDHCPU Q13UDHCPU
Q10UDEHCPU Q13UDEHCPU
*4
252
*5
*6