Mitsubishi Electric Q26UD(E)HCPU User Manual page 207

Melsecq series

Hide thumbs Also See for Q26UD(E)HCPU:

Table of Contents

For the descriptions of the specification items, refer to Page 213, Section 7.2.2.

Although the POWER LED momentarily turns on in red immediately after the power supply is turned on or off, the

Q64RPN or Q64RP are not faulty.

When mounting the Q64RP to the Q65WRB, use the Q64RP whose first 6 digits of serial No. is "081103" or later. The

vibration condition described in the general specifications may not be met if the serial number (first six digits) of the

Q64RP is "081102" or earlier is mounted.

During the operation for the Q64RP, do not allow the input voltage to change from 200VAC level (170 to 264VAC) to

100VAC level (85 to 132VAC). (If changed, the POWER LED of the module turns red and the system operation stops.)

Performance Specifications

CHAPTER 7 POWER SUPPLY MODULE

Show Quick Links

Table of Contents