Mitsubishi Electric Q26UD(E)HCPU User Manual page 429

Error code
Error item
(Hexadecimal)
File-related
41D3
H
error
File-related
41D4
H
error
File-related
41D5
H
error
File-related
41D6
H
error
File-related
41D7
H
error
File-related
41D8
H
error
File-related
41DF
H
error
File-related
41E0
H
error
File-related
41E1
H
error
File-related
41E4
H
error
File-related
41E7
H
error
File-related
41E8
H
error
File-related
41E9
H
error
File-related
41EB
H
error
File-related
41EC
H
error
File-related
41ED
H
error
Error details
Access into the SD memory card has failed.
The size of the specified file has exceeded that
of the existing file.
The file of the same name exists.
The format information data of the specified drive
(memory) is abnormal.
The format information data of the specified drive
(memory) is abnormal.
The specified file is being accessed.
The specified drive (memory) is write-protected.
The specified drive (memory) is abnormal or
does not exist.
Access to the flash ROM was unsuccessful.
Access to the memory card or SD memory card
was unsuccessful.
The format information data of the specified drive
(memory) is abnormal.
The format information data of the specified drive
(memory) is abnormal.
The specified file is being accessed.
The file name is specified in a wrong method.
The file system of the specified drive (memory) is
logically corrupted.
The specified drive (memory) does not have
continuous free space. (The free space for file is
sufficient but the continuous free space is
insufficient.)
Corrective action
• Check if the SD memory card is inserted, and
execute the processing again.
• Replace the SD memory card, and execute the
processing again.
• Execute the data backup, and format the PLC
memory.
Execute again after checking the size of the
specified file.
If the error recurs after re-execution, the file
information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
Forcibly execute the request, or execute after
changing the file name.
The file information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
The file information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
Execute again after a while.
Execute again after canceling the write protect of
the specified drive (memory).
• Execute the operation again after checking that
the memory card or SD memory card has been
inserted.
• After backing up the data, execute
programmable controller memory format.
• After backing up the data, execute write to PLC
(Flash ROM).
• Execute the operation again after checking that
the specified drive is a flash ROM and that the
size of the memory card or SD memory card is
correct.
• Execute the operation again after checking that
the memory card or SD memory card has been
inserted.
• Execute the operation again after replacing the
memory card or SD memory card.
• After backing up the data, execute
programmable controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
The file information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
Execute again after a while.
Execute again after checking the file name.
The file information data may have been
corrupted.
After backing up the data in the CPU module,
format the CPU memory.
Execute again after deleting unnecessary files or
executing programmable controller memory
arrangement.
APPENDICES
Corresponding
CPU
A
QnUDV
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
427