Mitsubishi Electric Q26UD(E)HCPU User Manual page 134

No. Name
17) Battery connector pin
*1
18)
USB connector
*1
19)
RS-232 connector
20)
RUN/STOP/RESET switch
*1 When leaving a cable connected to a USB connector or RS-232 connector, clamp the cable.
The Q6HLD-R2 type RS-232 connector disconnection prevention holder is available as a clamp for the RS-232
connector.
*2 Operate the RUN/STOP/RESET switch with your fingertips.
To prevent the switch from being damaged, do not use any tool such as screw driver.
132
For connection of the battery lead wires.
(Lead wires are disconnected from the connector when shipping to prevent the battery from
consuming.)
Connector for connection with USB-compatible peripheral devices. (Connector type miniB)
Can be connected by USB-dedicated cable.
Connector for connecting a peripheral device by RS-232.
Can be connected by RS-232 connection cable. (QC30R2)
RUN: Executes sequence program operation.
STOP: Stops sequence program operation.
RESET:
*2
Performs hardware reset, operation error reset, operation initialization or like.
( Page 182, Section 6.4.1)
CPU module
RS-232 cable
Application
Q6HLD-R2
Fixing screw