Mitsubishi Electric Q26UD(E)HCPU User Manual page 470

(6) Drive information
Number Name
Memory card
SM600
usable flags
Memory card
SM601
protect flag
SM602 Drive 1 flag
SM603 Drive 2 flag
Memory card in-
SM604
use flag
Memory card
SM605 remove/insert
prohibit flag
SD memory card
SM606 forced disable
instruction
468
Meaning
This relay turns on when the memory
card becomes ready for use.
OFF: Unusable
ON: Usable
This relay turns on when the SD memory
card becomes ready for use. (This relay
turns on when a compatible SD memory
card is inserted and set to be enabled.)
This relay is on while the write-protect
OFF: Not protected
switch of the memory card or SD memory
ON: Protected
card is on.
This relay is on while a RAM is being
OFF: No drive 1 inserted.
ON: Drive 1 present This relay is always off when the
QnUDVCPU is used.
This relay is on while a ROM is being
inserted.
OFF: No drive 2
ON: Drive 2 present
This relay is on while a SD memory card
is being inserted. (This relay is on while a
SD memory card is being inserted,
regardless of the availability and the type
of the card.)
OFF: Not used This relay is on while a memory card or
ON: In use SD memory card is being used.
This relay is turned on to disable the
insertion and removal of a memory card.
• This relay is turned on to disable the
insertion and removal of an SD
memory card.
OFF: Remove/insert
• When this relay is turned on, the
enabled
system turns on SM607 (SD memory
ON: Remove/insert
card forced disable status flag), and
prohibited
then turns off this relay.
This relay is turned on to disable the
insertion and removal of a memory card.
(This relay turns on when a compatible
SD memory card is inserted and set to be
enabled with the SD memory card lock
switch. This relay does not turn on while
"ICM.OPE.ERROR" occurs.)
• This relay is turned on to execute the
SD memory card forced disable
OFF: SD memory card
instruction. When there are any
forced disable
functions accessing to an SD memory
cancel instruction
card, the process of disablement is
ON: SD memory card
held until it is completed.
forced disable
• This relay is turned off to cancel the SD
instruction
memory card forced disable
instruction.
Set by
Explanation
(When Set)
S (Status
change)
S (Status
change)
S (Status
change)
S (Status
change)
S (Status
change)
S (Status
change)
Corresponding
Corresponding
ACPU
M9
QnU
New
New
New
QnU
New
New
U
QnU
U/S
New
U New
CPU
Qn(H)
QnPH
QnPRH
*1
(except
QnUDV)
QnUDV
LCPU
Qn(H)
QnPH
QnPRH
*1
QnU
LCPU
Qn(H)
QnPH
QnPRH
*1
QnU
Qn(H)
QnPH
QnPRH
*1
(except
QnUDV)
QnUDV
LCPU
Qn(H)
QnPH
QnPRH
*1
QnU
LCPU
Qn(H)
QnPH
QnPRH
*1
(except
QnUDV)
QnUDV
LCPU
QnUDV
LCPU