Mitsubishi Electric Q26UD(E)HCPU User Manual page 67

(2) Mounting a base unit on a DIN rail
Note the following when mounting a DIN rail.
Mounting a DIN rail needs special adaptors (optional), which are user-prepared.
(a) Applicable adaptor types
For Q38B, Q312B, Q68B, Q612B, Q38RB, Q68RB,
Q65WRB, Q38DB, Q312DB
For Q35B, Q35DB, Q65B, Q00JCPU, Q00UJCPU
For Q33B, Q52B, Q55B, Q63B, Q32SB, Q33SB, Q35SB
DIN rail mounting
adaptors
Adaptor(Large)
Q6DIN1
Q6DIN2
Q6DIN3
(b) Adaptor installation method
The following figures show how to attach adaptors for mounting a base unit on a DIN rail.
Base unit rear
Insert the adaptor (large) into the grooves of
the base unit from below.
(c) Applicable DIN rail types (IEC 60715)
TH35-7.5Fe
TH35-7.5Al
TH35-15Fe
Quantity of included parts
Adaptor(small)
2 4
2 3
1 2
CHAPTER 4 INSTALLATION AND WIRING
: Q6DIN1
: Q6DIN2
: Q6DIN3
Mounting screw
Square washer
(M5 × 10)
3
2
2
Place the hook of the adaptor
(small) in the lower hole.
Push the bottom of the adaptor (large) far enough
until it "clicks".
Stopper
3 2
2 2
2 2
Push the top of the adaptor
(small) far enough until it
"clicks".
65
4