Mitsubishi Electric Q26UD(E)HCPU User Manual page 140

No. Name
16) Battery connector pin
17) Battery
18) Module mounting lever
*1 When a cable is connected to the USB connector and RS-232 connector at all times, clamp the cable to prevent a poor
connection, moving, and disconnection by unintentional pulling. The Q6HLD-R2 type RS-232 connector disconnection
prevention holder is available as a clamp for RS-232 connector.
*2 Operate the RUN/STOP/RESET switch with your fingertips. To prevent the switch from being damaged, do not use any
tool such as screw driver.
138
For connection of battery lead wires.
(Lead wires are disconnected from the connector when shipping to prevent the battery from
consuming.)
Backup battery for use of standard RAM and backup power time function.
Lever used to mount the module to the base unit.
CPU module
RS-232 cable
Fixing screw
Application
Q6HLD-R2