Mitsubishi Electric Q26UD(E)HCPU User Manual page 474

(7) Instruction-related relay
Number Name
SM700 Carry flag
Number of output
SM701 characters
selection
SM702 Search method
SM703 Sort order
SM704 Block comparison
DT/TM instruction
SM709 improper data
detection flag
CHK instruction
SM710
priority ranking flag
SM715 EI flag
Block comparison
SM716 (Except an
interrupt program)
Block comparison
SM717
(Interrupt program)
Block comparison
SM718 (Interrupt program
(I45))
SMOV instruction
SM719 BCD conversion
prohibit flag
472
Meaning
OFF: Carry OFF
Carry flag used in application instruction
ON: Carry ON
OFF: Output until NULL
Used for the PR, PRC, BINDA, DBINDA,
code encountered
BINHA, DBINHA, BCDDA, DBCDDA, or
ON: 16 characters
COMRD instruction
output
• Designates method to be used by
OFF: Search next search instruction.
ON: 2-part search • Data must be arranged for 2-part
search.
The sort instruction is used to designate
OFF: Ascending order
whether data should be sorted in
ON: Descending order
ascending order or in descending order.
This relay turns on when all data
conditions are met for the BKCMP
instruction.
OFF: Mismatch found
ON: All match
This relay turns on when all data
conditions are met for the DBKCMP
instruction.
This relay turns on when the data to be
OFF: Improper data not compared by the DT or TM instruction
detected cannot be recognized as date or time
ON: Improper data data, when the device (three words) to be
detected compared is exceeding the specified
device range.
• Remains as originally set when OFF.
OFF: Conditions priority
• Priority for the CHK instruction is
ON: Pattern priority
changed when on.
OFF: During DI This relay is on while the EI instruction is
ON: During EI being executed.
This relay turns on when all data
conditions are met for the DBKCMP
instruction. (Initial execution type
OFF: Mismatch found
program and scan execution type
ON: No mismatch
program or standby type program
executed from initial execution type
program or scan execution type program)
This relay turns on when all data
conditions are met for the DBKCMP
OFF: Mismatch found instruction. (Interrupt program, fixed scan
ON: No mismatch execution type program, or standby type
program executed from interrupt program
or fixed scan execution type program)
This relay turns on when all data
conditions are met for the DBKCMP
OFF: Mismatch found
instruction. (Interrupt program (I45) or
ON: No mismatch
standby type program that was executed
from interrupt program (I45))
OFF: BCD conversion
This relay switches to on when disabling
enabled
conversion from BIN data to BCD data
ON: BCD conversion
with the SMOV instruction.
disabled
Explanation
(When Set)
(Instruction
execution)
(Instruction
execution)
(Instruction
execution)/U
(Instruction
execution)
(Instruction
execution)
(Instruction
execution)
(Instruction
execution)
(Instruction
execution)
Corresponding
Set by
ACPU
M9
S
M9012
U M9049
U New
U New
S
New
S
New
S
New
S
New
S
New
S
New
S
New
U New
Corresponding
CPU
QCPU
LCPU
Qn(H)
QnPH
QnPRH
QnU
LCPU
QCPU
LCPU
QCPU
LCPU
QCPU
LCPU
*2
QnU
LCPU
*2
QnU
LCPU
Qn(H)
QnPH
QnPRH
QCPU
LCPU
*2
QnU
LCPU
*2
QnU
LCPU
*3
QnU
*16
QnUDV
*15
LCPU