Analog Input Configuration - Thermo Scientific 42i Instruction Manual

Operation
Instrument Controls Menu
Analog Input
Configuration
3-50 Model 42i Trace Level Instruction Manual
Concentrations
LO NO dual mode)
2
LO NO (dual mode)
x
HI NO (dual mode)
HI NO (dual mode)
2
HI NO dual mode)
x
Range (NO
Prereactor (single/auto range mode)
LO Prereactor (dual mode)
HI Prereactor (dual mode)
The Analog Input Configuration menu displays a list of the 8 analog input
channels available for configuration. This screen is only displayed if the I/O
expansion board option is installed. Configuration includes entering
descriptor, units, decimal places, choice of 1-10 points in the table, and
corresponding number of points selected.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config.
Descriptor
The Descriptor screen allows the user to enter the descriptor for the
selected analog input channel. The descriptor is used in datalogging and
) (auto range mode)
x
ANALOG INPUT CONFIG:
>CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
RANGE AVG DIAGS ALARM
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR
UNITS
DECIMAL PLACES
TABLE POINTS
POINT 1
POINT 2
RANGE AVG DIAGS ALARM
Other Measurements
Chamber Pressure
Flow
PMT Volts
Ozonator Flow
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN1
V
2
2
Analog Inputs
Analog Input 5
Analog Input 6
Analog Input 7
Analog Input 8
Thermo Fisher Scientific